Sep 112012
 

Here’a s quick little diy project for you to kick off your Tuesday!

Gather your supplies:

Rope

A roll of magnets

Hot Glue

Scissors

Get started:

Decide how long you want your magnet to be. I’ve made them varying lengths. The longer it is, the stronger it is.

Cut your magnet to the desired length. Then cut 3 pieces of rope slightly longer than the magnet. (You want the rope to fully cover the magnet). I should mention that the width of your magnet and size of your rope may vary from mine. It may take more or less strips of your rope to cover your magnet.

If your magnet had a sticky side, like mine did, peel off the back. Then glue your rope to the sticky side and you’re done!

(If your rope starts to unravel, which it might, just use some hot glue to hold it all together).

 

 September 11, 2012  Posted by at 08:32 diy  Add comments

  One Response to “diy rope magnet”

Comments (1)
  1. Your ideas are so original. This is perfect for our home as we live on a lake.
    Will try to find a pelican or anchor pendant to glue on the front.

    I see that I am going to have to devote an afternoon to reading your archives
    after I finish all the decorations for my granddaughter’s 1st bday party.

    Thanks for taking the time to share all your ideas with the world!
    Vicki

 Leave a Reply

(required)

(required)